WT-5810 D03ER

Diversity Receiver

WT-5810 D03ER

The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed to be used with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.

Diversity operation
Automatic frequency scan
Additional audio mixing input
Adjustable triple-squelch
Battery status indicator
Provides 16 intermodulation-free frequencies
Allows simultaneous operation for up to 16 WT-5810 units without running the risk of interferences
Excellent unit to take to every gig or lecture
Other features: Battery status LED, channel display, AF peak LED, antenna A/B-LED

Specifications A&E Specs Downloads

(*1) 0 dB = 1 V

Power Source

AC mains (supplied AC adapter must be used)

Power Consumption

130 mA (12 V DC)

Receiving Frequency

576 - 865 MHz, UHF

Channel Selection

16 channels

Receiving System

Double super-heterodyne

Diversity System

Space diversity

Mixing Output

MIC: -60 dB (*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB (*1), 600 Ω, unbalanced, phone jack

Mixing Input

-20 dB (*1), 10 kΩ, unbalanced, phone jack

Antenna

Whip antenna

Receiving Sensitivity

90 dB or more, Signal to Noise ratio (20 dBμV input, 40 kHz deviation)

Squelch Sensitivity

16 - 40 dBμV variable

Squelch System

Using together of noise SQ, carrier SQ and tone SQ

Tone Frequency

32.768 kHz

Indicator

ANT A/B, Audio (peak), Battery alarm, Channel number

Channel Check

Usable frequencies scanning

Signal to Noise Ratio

104 dB or more (A-weight, unbalanced output)

Frequency Response

100 Hz - 15 kHz, ±3 dB

Operating Temperature

-10 °C to +50 °C (14 °F to 122 °F)

Operating Humidity

30 % to 85 %RH

Finish

Resin, black

Dimensions

206 (W) x 40.6 (H) x 152.7 (D) mm (8.11" x 1.6" x 6.01") (excluding antenna)

Weight

590 g (1.3 lb)

Included Accessories

AC adapter x 1

Please download Datasheet to access full specifications.

The wireless receiver shall have 16 selectable channels. The receiving method shall be double super-heterodyne using threshold-comparative antenna switching diversity. Specifications shall include a S/N ratio of greater than 104 dB (A-weighted), harmonic distortion of less than 1% and frequency response of 100 - 15k Hz, +/-3 dB. The receiving sensitivity shall be greater than 90 dB with 20 dBµV input and 40k Hz deviation. Squelch types shall be carrier, noise and tone key with a variable squelch sensitivity of 18 - 40 dBµV and a 32.768k Hz tone key frequency. The unit shall have two fixed-mount antennas. The audio outputs shall be balanced type with XLR-M jack and sensitivity of -60 dB / 1 mV, and unbalanced type with 1/4" phone jack and sensitivity of -20 dB / 100 mV, both with an output impedance of 600 ohms. A Mix Input, unbalanced type with 1/4" phone jack with an input impedance of 10k ohms and sensitivity of -20 dBV/100 mV shall allow the connection of the output of a second receiver or other audio source to be mixed with the main receiver output signal. Front panel LED's shall include antenna A / B reception status, low battery indication, and an AF peak indicator that lights at 3 dB below clipping. Front panel controls shall include Next, and Set keys for channel selection, as well as Power, Volume, Squelch adjust and momentary Squelch Off key. The wireless receiver shall be powered from the AC mains using a supplied AC-DC adapter with a power consumption of 250 mA (12 VDC). The unit shall operate within a temperature range of -10° C to +50° C (+14° F to +122° F). Unit construction shall be black resin with dimensions (W x H x D) of 206 x 40 x 152 mm (8.11” x 1.58” x 6.0”) and weight of 590 g (1.3 lbs.). Included accessories shall be an external AC-DC adapter.

Please sign in to access further technical materials such as software, firmware or EASE files.