TZ-105
Column Speakers
TZ-105
The TZ-105 Column Speaker employs multiple cone speakers arranged vertically on a single baffle board to provide wider horizontal directivity.
- Narrow sound dispersion along a vertical axis, wide sound dispersion along a horizontal axis
- Splashproof metal body meets IPX3 requirements
- Speakers coming complete with wall mounting brackets or can be fitted to a speaker stand
Rated Input
10 W (Max. 15 W)
Rated Impedance
100 V line: 1 kΩ (10 W), 2 kΩ (5 W)
Sound Pressure Level
90 dB (1 W, 1 m)
Frequency Response
150 - 10,000 Hz
Speaker Component
12 cm cone-type x 2
Water Protection
IP-X3 equivalent
Finish
Enclosure: Extruded aluminum, silver gray, fully-glazed, baked paint
Grille: Punched aluminum net, black, matte, baked paint
Mounting bracket: Steel plate, silver gray, fully-glazed, baked paint
Grille: Punched aluminum net, black, matte, baked paint
Mounting bracket: Steel plate, silver gray, fully-glazed, baked paint
Dimensions
167 (W) x 335 (H) x 141 (D) mm
Weight
3.4 kg (unit only), 4 kg (including mounting bracket)
Included Accessories
Mounting bracket …2, Mounting bolt, washer, packing …1 set
[NOTE] A drainage hole is provided on the speaker cable side of the cabinet.
When installing the speaker outdoors, make sure that its speaker cable side faces the ground.
The speaker must be installed upright or facing down.
Installing the speaker in any other position may render the drainage hole ineffective, eventually
leading to an electrical failure or other damage.
When installing the speaker outdoors, make sure that its speaker cable side faces the ground.
The speaker must be installed upright or facing down.
Installing the speaker in any other position may render the drainage hole ineffective, eventually
leading to an electrical failure or other damage.
Please download Datasheet to access full specifications.
Optional Accessory
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
- Products
TZ-105
