IP-A1PC238

IP Ceiling Speaker 8W

IP-A1PC238

The IP-A1PC238 is a PoE-powered Ceiling Speaker with a built-in 8 W amplifier and internal data storage for up to 20 audio files. It supports SIP protocol for flexible integrations with VoIP devices, and its 20 multicast ports are available for group paging operations. It can also receive broadcasts from Video Management System using ONVIF. Device control and further system integration is accessed through remote API (HTTP) or local control inputs.

16cm (6”) cone-type speaker for in-ceiling installations
Receive SIP audio, ONVIF Audio and Multicast
Local broadcast using internal audio files or local audio source
1 audio input (LINE/MIC selectable, phantom power On/Off)
8W built-in amplifier, 1 LINE audio output
2 control inputs and 1 control output
HTTP commands (receive)
Audio file storage (20 files, total 80MB, WAV/MP3)
Playback programs (Repeat, Weekly Timer)
PoE powered

Specifications A&E Specs Downloads

Power Source

PoE (IEEE802.3af Class 3)

Power Consumption

12.95 W (rated output)
5 W (IEC62368-1)

Amplifier Rated Output

8 W

Sensitivity

94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)

Maximum Sound Pressure Level

103 dB (8 W, 1 m)

Frequency Response

60 Hz - 20 kHz (peak - 20 dB)

Speaker Component

16 cm (6") cone-type

Audio Codec

Opus, PCMU (G.711u), PCMA (G.711a), G.722

Broadcasting Mode

SIP Broadcasting/SIP calling Mode: Opus/PCMU/PCMA/G.722, P2P/SIP Server Connection
Multicast Broadcasting Mode: Opus/PCMU/PCMA/G.722 Auto codec recognition, 20 ports
VMS Broadcasting Mode: PCMU
Internal Message Broadcasting Mode
Local Broadcasting Mode: Output from LINE/MIC IN to SPEAKER OUT
Note: Each broadcast mode can be assigned an order of priority using the Priority Setting function.

Sound Source Files

Max. 20 files (File storage capacity: 80 MB total)
Supported file formats
WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo
MP3 file: 32/44.1/48 kHz sampling frequency, 64 - 320 kbps, CBR/VBR, monaural/stereo
Repeat playback: Playcount (1 - 10 times), Duration (5 - 3600 sec) or Timer (from Start time to End time)
Interval time: 0 - 60 sec, Delay time: 0 - 30 sec
Trigger: Control Input or Remote API (HTTP)

Network I/F

100BASE-TX, Auto MDI/MDI-X, RJ45 connector

Network Protocol

TCP/IP, UDP, HTTP, RTP, RTSP, RTCP, ARP, ICMP, IGMPv3, NTP, SIP (RFC3261)

Control Input

2 channels, no-voltage make contact inputs, open voltage: 5 V DC, short-circuit current: 2 mA or less, removable terminal block (6 pins)

Control Output

1 channel, open collector output, withstand voltage: 30 V DC, control current: 150 mA or less, removable terminal block (6 pins)

Indicator

STATUS (orange), LINK/ACT (green)

Clock Accuracy

±13 seconds per month

Time Adjustment

Manual time setting, Time adjustment by NTP server

Power Outage Protection Period

24 hours (RTC time retention, at 40 °C (104 °F)

Operating Temperature

0 °C to +50 °C (32 °F to 122 °F)

Operating Humidity

90 %RH or less (no condensation)

Dimensions for Fixing Hole

Mounting hole: Ø200 ±2 mm (7.87" ±0.08")
Ceiling thickness: 5 - 25 mm (0.2" - 0.98")

Speaker Mounting Method

Spring clamp

Finish

Frame: Steel plate, white (RAL 9016 equivalent), paint
Grill: Steel net, white (RAL 9016 equivalent), paint

Dimensions

Ø230 x 89 (D) mm (9.06" x 3.5")

Weight

880 g (1.94 lb.)

Included Accessories

Pattern paper x 1,
Removable terminal plug (6 pins, preinstalled on the unit) x 1

NOTE: Please do not install the product near heat insulation material, or cover the product with heat insulation or acoustic absorbing materials to prevent fire risk. Please do not install the product in damp or wet locations or areas with high humidity (condensing) as it may cause damage to the product.
*ONVIF is a registered trademark of ONVIF Inc.
*These specifications apply to the firmware version 3.1.0 or later. For the latest specifications and firmware, please refer to the TOA DATA Library (https://www.toa-products.com/international/)

Please download Datasheet to access full specifications.

The IP ceiling mount loudspeaker shall be of an in-ceiling type design, with a full lightweight metal construction with no visible fixings and a discreet outer bezel of only 5 mm. Installation shall be via pre-mounted springs allowing it to be mounted quickly and easily into ceilings with a thickness of between 5 – 25 mm (0.2" – 0.98"). The IP ceiling mount loudspeaker shall be SIP compatible to broadcast clear and intelligible VoIP messages via a single network cable and shall support various standard network protocols and forums such as ONVIF (Open Network Video Interface Forum) and shall be able to complement VMS (Video Management System) and other audio network integration systems.

Twenty multi-cast ports shall be available for group paging. The IP ceiling mount loudspeaker shall have the facility of storing up to twenty audio files with the code of WAV or MP3 format internally. The device shall have the flexibility of broadcasting these files at predetermined times by setting the start and end time along with the day(s) of the week or repeated when necessary and triggered from a control input, or remote API (HTTP). There shall be two controlled inputs and one controlled output. The IP ceiling mount loudspeaker shall be capable of being muted by TOA IP-A1PG Paging Gateway as the highest priority operation. Remote settings of the IP ceiling mount loudspeaker shall be achieved by connection to a Windows® based personal computer and by using the PC’s browser, operational settings, functions and system status can be established.

There shall be an internal class-D amplifier capable of producing up to 8 watts of power. The loudspeaker shall incorporate a single 16 cm (6”) full-range cone-type transducer with a smooth frequency response of 60 Hz to 20 kHz measured on axis with a Sound Pressure Level (SPL) of 94dB measured at 1 metre with a power input of 1 watt or 103dB with a power input of 8 watts measured at 1 metre. The power source shall be supplied from a PoE switching hub. The dimensions shall be Ø230 × 89 mm (d) (9.06" x 3.5") weighing 880 g (1.94 lbs). The finish of the loudspeaker shall be: Baffle: steel plate, white (RAL 9016 equivalent). Grille: Steel net, white (RAL 9016 or equivalent). Mounting bracket: steel plate.

Manufacturer: TOA Corporation Model: IP-A1PC238

Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.

Download Center

Products
IP-A1PC238