DA-X1000S-AS
Digital Power Amplifier 1x1000W
DA-X1000S-AS
This is a Class D amplifier used for VX-1000 system which is compliant with the Chinese Standard CCCF for fire alarm system, connected by a dedicated interface. This has AUX INPUT which is for general purpose connection. DA-X1000F single-channel amplifier is a part of VX-1000 Basic system and these models will be used with VX-1000MC. Basic concept is smooth connection and interface with VX-1000MC. PA-LINK connection with RJ45 connector is used.
- Low-loss Class D power amplifier
- 1 channel 1000W
- can be used as standby amplifier
Power Source
220 - 240V AC, 50Hz/60Hz, T6.3AL
Amplification System
Class D amplifier
Power Consumption
30 W (standby mode), 1200 W (Rated output 100 V line)
Input
1 channel: PA LINK (Dedicated configuration with VX-1000MC)
1 channel: AUX INPUT (PIN 1,2,3), Balanced input, Maximum input 0 dB (*1), Input impedance of 20 kΩ
1 channel: AUX INPUT (PIN 1,2,3), Balanced input, Maximum input 0 dB (*1), Input impedance of 20 kΩ
Rated Output
1 channel (2 Pin): 1000 W (100 V line)
Frequency Response
110 to16 kHz ±3dB
Total Harmonic Distortion
0.4% (1 W), 1% (Rated output)
Protection Circuit
Overcurrent protection, under-voltage protection, over-voltage protection, overheat protection, short curcuit protection
Signal to Noise Ratio
90 dB (A-weighted)
Control Input
ACTIVE control input: The AUX auxiliary signal is outputted when the ACTIVE INPUT(pin4,5) is short connected.
When the ACTIVE INPUT(pin4,5) is disconnected,the PA LINK signal is outputted
LED Indicator
POWER: Power Supply (Green) x 1, SIGNAL: Signal (Green) x 1, PEAK: Peak (Red) x 1, AUX ACTIVE: Auxillary Input (Orange) x 1, FAULT: Fault (Red or Orange) x 1
Cooling
The system controls the fan for heat dissipation
Operating Temperature
0°C to +40°C
Operating Humidity
90% RH or less (no condensation)
Control
Front: Power switch
Rear : Input volume
Rear : Input volume
Finish
Aluminum panel, Black, electrolytic plate, Black
Dimensions
483(W)×88(H)×392(D)mm
Weight
6.6 kg
Included Accessories
CE power cord x 1, UK power cord x 1, Foot Pad x 4, Fuse T6.3AL x 1 (built-in), Detachable terminal 2P x 1, Detachable terminal 5P x 1
Please download Datasheet to access full specifications.
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
- Products
DA-X1000S-AS
