PC-1860F

Ceiling Speaker

PC-1860F

The PC-1860F is suitable for announcements and BGM system use in high sound quality. The speaker’s design harmonizes with modern architecture and decor. The PC-1860F speaker is equipped with a fire dome to protect it from fire and to prevent fire from spreading through the ceiling.

Flat front panel
Quick and easy installation
Fire dome made of steel
Snap in cable terminal
6 W rated input
12 cm speaker

Specifications A&E Specs Downloads

Rated Input

6 W (100 V line), 3 W (70 V line)

Rated Impedance

100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)

Sensitivity

95 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)

Frequency Response

170 Hz - 20 kHz (peak -20 dB)

Speaker Component

12 cm (5") cone-type

Mounting Hole

Mounting hole: Ø156±3 mm (6.14±0.12")
Ceiling thickness: 5 - 25 mm (0.2" - 0.98")

Speaker Mounting Method

Spring catch

Cable Requirements

Solid wire: 0.5 - 3 mm² (AWG 20 - 12)

Connection

Push wire connection (Bridging terminal-2 branch type)

Operating Temperature

-10 °C to +50 °C (14 °F to 122 °F)

Finish

Frame: Steel plate, white (RAL 9016 equivalent), paint
Grille: Steel net, white (RAL 9016 equivalent), paint
Fire dome: Steel plate, black, paint

Dimensions

Ø180 x 5 (exposed section) + 100 (D) mm (7.09 x 0.2" + 3.94")

Weight

1 kg (2.2 lb)

Included Accessories

Rubber grommet …2, Paper pattern …1

Please download Datasheet to access full specifications.

The loudspeaker shall be of in-ceiling type design and shall consist of two parts, comprising of an inner mesh grille and chassis with an integral loudspeaker with no visible fixings and a discreet outer bezel of only 5 mm. The second part shall be a steel constructed fire dome for the prevention of smoke or fire spreading through ceiling voids in an emergency situation.

Installation shall be via a separate spring catch latching mechanism allowing it to be mounted in a ceiling with a thickness of between 5 – 25 mm (0.2" – 0.98").

A template shall be provided to assist in cutting mounting holes.

The loudspeaker shall incorporate a single 12 cm (5”) full range cone-type transducer with a smooth frequency response of 170 Hz to 20 kHz with a wide-angle dispersion.

The loudspeaker shall produce a Sound Pressure Level (SPL) of 95 dB (measured between 500 Hz – 5 kHz of pink noise) on axis at 1 meter with a power input of 1 watt and shall be capable of producing 6 watts (for 100 V Line) and 3 watts (for 70 V Line) of power.

The loudspeaker shall be fitted with a factory mounted transformer with easy selectable power tappings of 6 W, 3 W, 1.5 W and 0.8 W when using 100 V Line and 3 W, 1.5 W, 0.8 W and 0.4 W when using 70 V Line. Push-in-type connectors shall make cable connection quick and easy and shall allow bridge connection when necessary.

The dimensions shall be Ø180 × 100 mm (d) (7.09" x 3.94") weighing 1 kg (2.2 lb.)

The finish of the loudspeaker shall be: Baffle: steel plate, white (RAL 9016 equivalent). Grille: Steel net, white (RAL 9016 equivalent). Mounting bracket: steel plate.

Manufacturer: TOA Corporation

Model: PC-1860F