PC-1860EN
Ceiling Speaker
PC-1860EN
The ceiling speakers of the PC-series are suitable for announcements and BGM system use in high quality. The speaker's design harmonizes with modern architecture and decor. The PC-1860EN is designed according to EN54-24.
- Flat front panel
- Quick and easy installation
- Dripping-water protection
- Snap in cable terminal
- 6 W rated input
- Additional DC blocking capacitor
- 12 cm speaker
Rated Input
6 W (100 V line), 3 W (70 V line)
Rated Impedance
100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
Sensitivity
94 dB (1 W, 1 m) (500 Hz - 5 kHz, pink noise)
92 dB (1 W, 1 m) (100 Hz - 10 kHz, pink noise)
80 dB (1 W, 4 m) (100 Hz - 10 kHz, pink noise)
92 dB (1 W, 1 m) (100 Hz - 10 kHz, pink noise)
80 dB (1 W, 4 m) (100 Hz - 10 kHz, pink noise)
Maximum Sound Pressure Level
99 dB (6 W, 1 m) (100 Hz - 10 kHz, pink noise)
87 dB (6 W, 4 m) (100 Hz - 10 kHz, pink noise)
87 dB (6 W, 4 m) (100 Hz - 10 kHz, pink noise)
Frequency Response
80 Hz - 20 kHz (peak -20 dB)
Coverage Angle
Horizontal and Vertical: 165° (500 Hz), 175° (1 kHz), 165° (2 kHz), 70° (4 kHz)
according to EN 54-24
according to EN 54-24
Environmental Type
A (indoor applications)
Speaker Component
12 cm (5) cone-type
-10 ℃ to +50 ℃ (14 ℉ to 122 ℉)
-10 ℃ to +50 ℃ (14 ℉ to 122 ℉)
Mounting Hole
Mounting hole: Φ150±3 mm (5.91±0.12")
Ceiling thickness: 5 - 25 mm (0.2 - 0.98")
Ceiling thickness: 5 - 25 mm (0.2 - 0.98")
Speaker Mounting Method
Spring clamp
Cable Requirements
Solid wire: 0.5 - 3 m㎡ (AWG 20 - 12)
Connection
Push wire connection (Bridging terminal-2 branch type)
Finish
Frame: Steel plate, white (RAL 9016 equivalent), paint
Grille: Steel net, white (RAL 9016 equivalent), paint
Grille: Steel net, white (RAL 9016 equivalent), paint
Dimensions
Φ180 x 70 (D) mm (7.09 x 2.76")
Weight
560 g (1.23 lb)
Included Accessories
Paper pattern …1, Zip tie …2
Please download Datasheet to access full specifications.
The loudspeaker shall be of in-ceiling type design, with a full lightweight metal construction with no visible fixings and a discreet outer bezel of only 5 mm.
Installation shall be via pre-mounted springs allowing it to be mounted in a ceiling with a thickness of between 5 – 25 mm (0.2" – 0.98").
A template shall be provided to assist in cutting mounting holes.
The loudspeaker shall incorporate a single 12 cm (5”) full range cone-type transducer with a smooth frequency response of 80 Hz to 20 kHz measured on axis.
The loudspeaker shall produce a Sound Pressure Level (SPL) of 94 dB on axis at 1 meter with a power input of 1 watt and 80dB (measured between 100Hz – 10kHz of pink noise) on axis at 4 meters with a power input of 1 watt. The loudspeaker shall be capable of producing 6 watts (for 100 V Line) and 3 watts (for 70 V Line) of power.
The loudspeaker shall be fitted with a factory mounted transformer with easy selectable power tappings of 6 W, 3 W, 1.5 W and 0.8 W when using 100 V Line and 3 W, 1.5 W, 0.8 W and 0.4 W when using 70 V Line. Push-in-type connectors capable of handling solid cable: 0.5 – 3 mm² (AWG 20 – 12) shall be employed and shall allow bridge connection when necessary.
The dimensions shall be Ø180 × 70 mm (d) (7.09" x 2.76") weighing 560 g (1.23 lb.)
The finish of the loudspeaker shall be: Baffle: steel plate, white (RAL 9016 equivalent). Grille: Steel net, white (RAL 9016 equivalent). Mounting bracket: steel plate.
The ceiling mount loudspeaker shall be certified according to the following standards: European Standard EN 54-24: 2008, International Standard ISO 7240-24: 2010.
Manufacturer: TOA Corporation
Model: PC-1860EN
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
- Products
PC-1860EN
